Cell-Con provides a safe and effective Lead Acid battery charger solution for charging SLA batteries using a 3-step charge algorithm. In the first phase, the charger will fill the battery to 80-90% capacity. Once at this level, the charger goes into the second phase to fill the remaining 10-20% of capacity until a low-level current is detected or a timer expires (depending upon the specific model). The third and final phase reduces the charge current to a safe level where the battery can be left attached to the charger indefinitely.
Unlike traditional ‘taper’ chargers, Cell-Con Lead Acid battery chargers utilize a constant current level in the first mode. When the battery voltage rises to the maximum cycle voltage during charging, the chargers do not immediately change to float mode. Instead, the charger will look for a low-level current (current detection) or the expiration of time to terminate constant voltage mode. When the constant voltage mode begins, the battery is already charged to 80-90% of full capacity and can be used at this point if desired. Allowing phase two to conclude ensures that the battery will receive the remaining 10-20% capacity.
Once the low-level current is detected, or the timer expires, the constant voltage level of the Lead Acid battery charger is reduced to a safe value (going into float mode) where the battery can be left on indefinitely without risk of overcharge.
Call to speak directly with a battery charger expert: 800-771-7139
Standard features for all chargers include:
- CE, UL-60601-1 medically approved models
- Universal input (90-264VAC / 47-63Hz) for worldwide use
- Desktop and wall plug in versions
- 3 step charge control
- 6V, 12V, 24V, 36V, and 48V versions available
- Current detection or timer charge termination
- Protected against reverse polarity and short circuit
- Customized versions available
Product Lineup
| Click to See Image |
Series # click for details |
Wattage | Charge Rate | Capacity Range | Input | 6V | 12V | 24V | 36V | 48V | Configuration | Dimensions |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
 |
452240-S | 16W | 500mA – 1.3A | 1.5Ah – 12Ah | 90-264VAC | • | • | • | desktop | 3.5” x 1.75” x 1.75” | ||
 |
452241-S | 16W | 500mA – 1.3A | 1.5Ah – 12Ah | 90-264VAC | • | • | • | wall plug in | 4” x 1.75” x 1.5” | ||
 |
452541-S* | 35W | 1.2A – 2.2A | 4.5Ah – 60Ah | 90-264VAC | • | • | desktop | 4.25” x 2.64” x 1.5” | |||
 |
452544-S | 35W | 1.2A – 2.7A | 10Ah – 25Ah | 10-30VDC | • | • | • | desktop | 4.25” x 2.64” x 1.5” | ||
 |
452440-S | 60W | 2.5A – 4A | 20Ah – 200Ah | 90-264VAC | • | • | desktop | 5.31” x 3.15” x 1.73” | |||
 |
453240-S | 103W | 3.5A – 7A | 60Ah – 150Ah | 110VAC | • | • | desktop | 6.25” x 3.25” x 1.75” | |||
 |
459740-S | 120W | 2.5A – 10A | 40Ah – 400Ah | 110VAC | • | • | • | • | desktop | 7.25” x 6.75” x 2.5” | |
 |
452745-S | 300W | 10A – 20A | 100Ah – 1000Ah | 120VAC | • | • | desktop | 8.5” x 7.35” x 5.5” | |||
 |
453540-S | 300W | 10A – 20A | 100Ah – 1000Ah | 110 – 120VAC | • | • | desktop | 8.27” x 4.45” x 2.09” | |||
 |
453743-S | 16W | 560mA – 1.5A | 1.5Ah – 15Ah | 90 – 264VAC | • | • | • | • | WPI or desktop | 4.25” x 2.00” x 1.12” | |
 |
453546-S | 28W | 1A – 2A | 4Ah – 60Ah | 90 – 264VAC | • | • | WPI or desktop | 4.88” x 2.00” x 1.46” |